1. Preparing the raw material;

Prepare all kinds of raw material, such as the wood sawdust, wood chips, wood logs, wood shavings or other wood waste. 

2. Crushing process;

The complete pellet line requires all the raw material sizes should be smaller than 8mm, so if the raw material is bigger than 

this size, then crushing process should be needed.

For the crushing process, we always takes the hammer mill as the main choices as his advantages, which will detail explain

in the hammer crusher products.

3. Drying process;

The complete pellet line requires all the raw material water content is between 15-20%, 

If the raw material is not in this scope, then it should add water or dry it. There are many kinds of dryer in the market, but most 

choose the rotary dryer as main choices as his easy operate etc.

4. Pelleting Process;

The pellet machine is the key machine in the complete pellet line, and the final pellets quality and quantity is up to this machine;

This process is the physical changes, compress the wood sawdust into wood pellets through the pressure between the rollers 

and dies.

There are main two kinds in the market, to choose which kinds is up to the raw material character.

5. Hot Pellet Cooling Process;

The conveyor transports the hot wood pellets into a pellet cooler. For complete set of wood pellet making line, the counterflow 

cooler is necessary to hardened pellets and direct pack. The final temperature will be about 3-5 degree than room temperature.

6. Sorting Screening Process;

Although the pellet machine is very good, but also some broken pellet will produce, so for the complete pellet line, the sorting 

machine is necessary.

However for the simple pellet line, it depends.

7. Packing Process;

There are also two kinds of packing process, one the big bag packing for 500-1000kg per bag;

Another is the 25-25kg per bag for small bags.

It can be sewing bags or the hot-seal bags.