How to disassemble the ring die pellet machine
创始人
2025-07-18 14:20:19
323次
Before removing the ring die, ensure die holes are filled with oily materials.
Loosen cutter seat clamping bolts; move the cutter up.
Open the main door, remove feed hopper bolts with an Allen wrench, then take off the hopper.
Remove the gap adjustment block if needed; adjust the pressure roller so its outside is away from the ring die’s inner wall.
Remove the screen between the ring die and connecting sleeve.
The ring die is large and heavy: take protection. Lift with a crane to prevent falling; pry with a crowbar if tight.
上一篇：Key steps for cleaning wood pellet machine
下一篇：Recommendations for ring die selection in ring die pellet machine
相关内容
热门资讯
Biomass Pellet ...
If your pellet mill discharges only fine powder in...
Straw Pellets T...
Core Issue: Excessive carbonization of raw materia...
Maintenance Met...
Hard impurities in raw materials, overly dry and h...
Causes and Solu...
Causes of pellet mill malfunctions:1.Insufficient ...
Why is the pell...
Common Causes of uneven discharge in biomass pelle...
Troubleshooting...
If abnormal noises or excessive vibrations occur d...
How to Make Hom...
Ingredient Preparation: Mix livestock manure and s...
When should the...
The key criteria for replacing a pellet mill's rol...
Wood chipper fe...
The stability of the wood chipper feeding system i...
Correct usage o...
The automatic lubrication system is a core mainten...